Balaji Gypsum Private Limited

Gyproc Plaster Bonding Solution

Gyproc BOND-it is a bonding agent for Gypsum plaster & Sand cement plaster that enables preparation of Ceiling and wall surfaces (especially RCC surfaces) within 24 hours. Gyproc BOND-it eliminates risk of debonding gypsum plaster or sand cement plaster from ceiling (RCC surface) due to its low suction background and continuously under pressure of gravity. It enables dual benefits of mechanical and chemical bonding, and completely eliminates the labour intensive hacking process and the risk of plaster de-bonding.

Gyproc BOND-it increases pull out strength by 5 times against conventional hacking process. New technology like aluminium formwork shuttering needs products like Gyproc BOND-it to provide adhesion of Gypsum plastering.

Features and Benefits

Features

Dual Bonding Chemical and Mechanical Key

Single Coat brush application

No Tackiness required

Green Colour

Benefits

2X more strength

10X faster Application

Easy Supervision

Areas of Application

RCC Columns

Beams

Concrete Surfaces

Slabs

Sheer Walls

Application Procedure

Background Preparation:

Surface on which BOND-it application to be done should be clean, dry and free from mold oil or any other agents. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified. Just before application of BOND-it, prewetting must be done with the help of a brush/roller.

Mixing:

Mix material properly with clean rod to properly distribute solid particles in the solution.

Application:

Use good quality paint brush. The brush should be cleaned with enough water immediately after use. Apply with even distribution of fine aggregates over the surface. Allow it to dry thoroughly for around 24 hours.

Application instructions

Three Easy Steps to Use Gyproc BOND-it

 

STEP 1 : Open and stir the contents

STEP 2 : Apply with a paint brush

STEP 3 : Dry for 24 hrs. Surface ready for plastering

• Gyproc BOND-it ‘Bonding Agent” - a unique product that serves as an excellent bond on the RCC background and the internal gypsum based or any other plaster based wall lining. Its unique formula of Polymer, selected sand fillers, additives & polymers makes it coarse and improves its bonding properties.You need not physically develop the surface by hacking or any other methods. Bonding Agent is specially formulated as a plaster bonding agent for pre – treatment of smooth backgrounds. It contains an aggregate to provide a mechanical key
• Features • Excellent cohesive bond to RCC, Concrete and other surfaces. • Better adhesion /bonding due to lime/sand powder • Application in one coat • Green in color for easy identification • Contains fine aggregates for better mechanical, as well as chemical adhesion Technical & Physical Parameters Setting Time 24 Hrs Color Green Bonding Strength > 1 Mpa* Type Colloidal solution with suspended solids