Gypsum Powder

We are a leading Wholesaler of gyproc elite 100 one coat gypsum plaster, mega shine gypsum powder, gyproc elite mr one coat gypsum plaster, gyproc xpert+ stucco gypsum plaster and balaji gypsum one coat plaster from Pune, India.

Gyproc Elite 100 One Coat Gypsum Plaster

Request Callback

₹ 325 / Bag Get Latest Price

Product Brochure
Packaging Size25 Kg
BrandGyproc
Grade StandardA Grade
Usage/ApplicationConstruction
ColorWhite
Packaging typePP Bag
Country of OriginMade in India
Saint Gobain Gyproc Elite 100 / Elite90 one coat gypsum plaster with lightweight aggregates is a replacement of traditional sand cement plaster and is suitable for application on most internal surfaces including brick, block and concrete. Gyproc Elite 100 consists of gypsum hemihydrate formulated with special additives to increase workability and control setting characteristics. Light weight aggregates “Perlite” improves the gypsum plaster's coverage, workability, and provides smooth finished surface.

Mega Shine Gypsum Powder

Request Callback

₹ 230 / kg Get Latest Price

ColorWhite
Usage/ApplicationConstruction
Packaging Size24 Kg
FormPowder
GradeSuper Fine
Packaging TypeBag
BrandMega Shine

Minimum order quantity: 10 kg

  • An 1S0 9001:2008 Certified
  • Save Valuable time
  • Crack Free
  • Excellent Coverage
  • Best Qualify
  • Brilliant Hardness  
  • National Che,ical & Minerals 
  • An extraordinary solution for both exterior and interior walls of architectural buildings, natural gypsum plaster is widely used for its easy-to-mix preparation, high-quality sturdiness, enormous tensile strength and smooth finishing. This plaster enables broader coverage of walls, hence reducing the cost and increasing efficiency. Its easy application procedure which can be painted with any latex-based paint when dry, makes natural gypsum plaster an excellent choice for bonding and appealing plastering quality.
  • Stucco One Coat 
  • Natural Gypsum Powder

Gyproc Elite MR One Coat Gypsum Plaster

Request Callback

₹ 380 / Bag Get Latest Price

Product Brochure
Packaging Size25 Kg
Maximum Applicable Thickness Per Layer13 mm
Construction Material TypeReady Mix Plaster
Grade StandardA Grade
Usage/ApplicationConstruction
ColorWhite
State/FormPowder
Setting Time35 min
Shelf Life3 Months
BrandGyproc
Packing TypeBag
Model Name/ NumberElite MR
ManufactureSaint Gobain

Minimum order quantity: 10 Bag

  • Gyproc Elite MR (Moisture Resistant) is a one coat gypsum plaster specifically designed to provide protection in wet areas like bathroom, kitchens, basement, garages, balconies, parking podium etc. It provides extra protection with low absorption of moisture in air or from surface giving excellent results in skirting area application with problems arising out of capillary action and efflorescence. It can be directly used over backgrounds like bricks, blocks, RCC etc and provides a smooth inert, high quality surface to internal walls and ceilings and a durable base for application of decorative finishes.
  • Moisture Resistance
  • Features 
  •  Eliminates two-step process of Sand Cement Plaster and POP punning
  • Doesn’t require water curing
  •  No shrinkage cracks 
  • Non-combustible (when tested in accordance with BS: 476: part 4:1970), therefore a good form of thermal protection to the building structure.
  •  The water absorption as per DIN EN 520 is less ≤10% 
  • Excellent Capillary 
  • Water absorption coefficient test method – BS EN 1015-18. 
  • GRIHA and Greenpro Certified
  • Technical & Physical Parameters Dry Bulk Density 770 Kg/m3 (Max) Wet Bulk Density 1.35 -1.5 g/cm3 Water To Powder Ratio 1:1.25 Setting Time 25-35 min
  •  Chemical Composition Calcium Sulphate Hemihydrate: CaS04. ½ H2O
  • Drying Type Setting
  •  Identification & Packing Elite MR(Moisture Resistant) is packed in PP bags. The outer layer of the bag is printed with the product image, safety instruction, batch number, date of manufacturing, UOM, correspondence address and application instructions.
  • Gyproc Elite MR (Moisture Resistant) is supplied in 25Kg bags. The dimensions of the bag ensure that a well-filled appearance is presented when filled and the bags can be stacked on a pallet in a stable and well-stacked array. Bags should be stored dry, as absorption of water shortens the setting time, causes set lumps to form in the bags and may reduce the strength of the set plasterwork. No hooks or any sharp tools should be used to carry bags from one location to another. Background Preparation Surfaces should be completely clean, reasonably dry, protected from the direct exposure from weather and suitable for the chosen specification. In addition, before plastering concrete backgrounds, ensure that any mould oil or other agents present are removed from the surface. No-fines concrete does not require wetting prior to plastering. Plaster should not be applied onto a ‘green’ background or when any free water is visible. Clean water should be applied 5-10 minutes before plaster application to control the suction. In-situ or pre-cast concrete which are exceptionally smooth or having low suction will require pre-treatment with Gyproc Bond-It bonding agent. Mixing Gyproc Elite MR (Moisture Resistant) is pre-mixed with aggregate and only clean water needs to be added to prepare it for use. Mixing should be carried out in a clean tray or bucket. Excessive mechanical mixing should be avoided. Tools and water used in mixing must be clean. Contamination from previous mixes can shorten the setting time and in turn reduce the strength of the plaster when set. Water to plaster ratio (1 part of water: 1.25 part of plaster by weight) should be maintained to have good cohesive workable mix. Prepare plaster mix as much as required depending upon the immediate scope of work. Once the mix has begun to set, additional water is not to be added, as performance properties of plaster will get altered, thus affecting workability, cohesiveness, adhesion properties and strength.

Gyproc Elite 100 One Coat Gypsum Plaster

Request Callback

₹ 325 / Bag Get Latest Price

Product Brochure
Packaging Size25 Kg
Maximum Applicable Thickness Per Layer13 mm
Construction Material TypeReady Mix Plaster
Grade StandardA Grade
Usage/ApplicationConstruction
ColorWhite
State/FormPowder
Setting Time25 min
Shelf Life3 Months
BrandGyproc
Model Name/ NumberElite 100
Packing TypeBag
ManufacturerSaint Gobain

Minimum order quantity: 10 Bag

  • Gyproc Elite 100 is a one coat gypsum plaster for use on almost all Internal substrates, e.g. brickwork, blocks or concrete. It provides Inert, smooth, high quality and durable base for application of decorative finishes over internal walls and ceilings. It is a lightweight, retarded hemihydrate, premixed gypsum plaster, with expanded perlite aggregates, requiring only addition of clean water to prepare it for use.
  • Features :Eliminates two-step process of Sand Cement Plaster and POP punning 
  •  Doesn’t require water curing 
  •  No shrinkage cracks 
  • Non-combustible (when tested in accordance with BS: 476: part 4:1970), therefore a good form of thermal protection to the building structure. 
  •  Use of light weight aggregates in the plaster mix help to improve the Thermal resistance. (Thermal Resistance R = 0.07m²K/W at 13mm thickness) 
  •  GRIHA and Greenpro Certified
  • Technical & Physical Parameters Dry Bulk Density 770 Kg/m3 (Max) Wet Bulk Density 1.35-1.5 g/cm3 Water To Powder Ratio 1:1.25 Setting Time 20-25 Minutes 
  • Chemical Composition: Calcium Sulphate Hemihydrate : CaS04. ½ H2O Drying Type Setting 
  • Identification & Packing: Elite-100 is packed in PP bags. The outer layer of the bag is printed with the product image, safety instruction, batch number, date of manufacturing, UOM, correspondence address and application instructions.
  • Coverage Applied Thickness 13 mm Coverage* 27 sq-ft/25 kg bag Standard Compliance IS 2547 (Part I)-1976 for chemical characteristics IS 2547 (Part II)-1976 for physical characteristics
  • Gyproc Elite-100 is supplied in 25Kg bags. The dimensions of the bag ensure that a well-filled appearance is presented when filled and the bags can be stacked on a pallet in a stable and well-stacked array. Bags should be stored dry, as absorption of water shortens the setting time, causes set lumps to form in the bags and may reduce the strength of the set plasterwork. No hooks or any sharp tools should be used to carry bags from one location to another.
  • Gyproc Elite-100 should be applied with firm pressure, built out to the required thickness, and ruled to an even surface and left as an undercoat to form a key for finish coat. A thin plaster mix is made and applied as a finish coat to provide smooth surface. It can be applied to an average thickness range of 6-15 mm on walls in one coat and up to 10 mm on ceilings. For thickness above this range, material needs to be applied in two coats . The thickness should not increase to more than 30 mm (average thickness) on walls and 20 mm (average thickness) on ceiling. After complete drying for usually 72 hrs (depends upon thickness and weather conditions) the plain smooth leveled surface is ready for painting.
  • Mixing Gyproc Elite-100 is pre-mixed with aggregate and only clean water needs to be added to prepare it for use. Mixing should be carried out in a clean tray or bath. Excessive mechanical mixing should be avoided. Tools and water used in mixing must be clean. Contamination from previous mixes can shorten the setting time and in turn reduce the strength of the plaster when set. Water to plaster ratio (1 part of water: 1.25 part of plaster by weight) should be maintained to have good cohesive workable mix. Prepare plaster mix as much as required depending upon the immediate scope of work. Once the mix has begun to set, additional water is not to be added, as performance properties of plaster will get altered, thus affecting workability, cohesiveness, adhesion properties and strength

Gyproc Xpert+ Stucco Gypsum Plaster

Request Callback

₹ 285 / Bag Get Latest Price

Product Brochure
Packaging Size25 Kg
Maximum Applicable Thickness Per Layer13 mm
Bulk Density880 Kg Per m3
Construction Material TypeReady Mix Plaster
Grade StandardA Grade
Usage/ApplicationConstruction
ColorWhite
State/FormPowder
Setting Time15 min
Shelf Life3 Months
BrandGyproc
Packing TypeBag
Model Name/NumberXpert+
ManufacturerSaint Gobain

Minimum order quantity: 10 Bag

  • Gyproc Xpert+ is a stucco gypsum plaster made for application on almost all backgrounds, e.g. brickwork, block work or concrete, suitable for application like POP punning (over Sand & Cement Plaster), bull marks, level strips, etc. It has special additives for enhanced setting time helps in controlling the onsite wastages. It provides perfectly lined and leveled surface providing a perfectly flat surface ready for painting.
  • Features : Extra whiteness 
  • Doesn’t require water curing 
  •  No shrinkage cracks 
  •  Non-combustible (when tested in accordance with BS: 476: part 4:1970), therefore a good form of thermal protection to the building structure.
  •  With improved Thermal resistance properties. (Thermal Resistance R = 0.07m²K/W at 13mm thickness)
  •  GRIHA and Greenpro Certified.
  • Technical & Physical Parameters Dry Bulk Density 880 Kg/m3 (Max) Wet Bulk Density 1.4-1.5 g/cm3 Water To Powder Ratio 1:1.25 Setting Time 10-15 min
  • Chemical Composition Calcium Sulphate Hemihydrate: CaS04. ½ H2OChemical Composition Calcium Sulphate Hemihydrate: CaS04. ½ H2O
  • Drying Type Setting
  • Identification & Packing Xpert+ is packed in PP bags. The outer layer of the bag is printed with the product image, safety instruction, batch number, date of manufacturing, UOM, correspondence address and application instructions.
  • Coverage Applied Thickness 13 mm Coverage* 18 sq-ft/25 kg bag
  • Standard Compliance IS 2547 (Part I)-1976 for chemical characteristics & physical characteristics
  • Gyproc Xpert+ is supplied both in 25Kg & 20 Kg bags. The dimensions of the bag ensure that a well-filled appearance is presented when filled and the bags can be stacked on a pallet in a stable and well-stacked array. Bags should be stored dry, as absorption of water shortens the setting time, causes set lumps to form in the bags and may reduce the strength of the set plasterwork. No hooks or any sharp tools should be used to carry bags from one location to another.
  • Background Preparation Surfaces should be reasonably dry, clean and protected from the weather, and suitable for the chosen specification. In addition, before plastering concrete backgrounds, ensure that any mould oil or other agents present are removed from the surface. No-fines concrete does not require wetting prior to plastering. Plaster should not be applied onto a ‘green’ background or when any free water is visible. Clean water should be applied 5-10 minutes before plaster application to control the suction. In-situ or pre-cast concrete which are exceptionally smooth
  • Mixing Gyproc Xpert+ is mixed with only clean water for preparation. Mixing should be carried out in a clean tray or bucket. Excessive mechanical mixing should be avoided. Tools and water used in mixing must be clean. Contamination from previous mixes can shorten the setting time and in turn reduce the strength of the plaster when set. Water to plaster ratio (1 part of water: 1.25 part of plaster by weight) should be maintained to have good cohesive workable mix. Prepare plaster mix as much as required depending upon the immediate scope of work. Once the mix has begun to set, water addition is not recommended, as performance properties of plaster will get altered, thus affecting workability, cohesiveness, adhesion properties and strength.
  • Application Gyproc Xpert+ should be applied with firm pressure, built out to the required thickness, and ruled to an even surface and left as an undercoat to form a key for finish coat. 

Balaji Gypsum One Coat Plaster

Request Callback

₹ 240 / Bag Get Latest Price

Packaging Size25 Kg
Maximum Applicable Thickness Per Layer13 mm
Bulk Density880 m3
Construction Material TypeReady Mix Plaster
Grade StandardA Grade
Usage/ApplicationConstruction
ColorWhite
State/FormPowder
Setting Time25 min
Shelf Life3 Months
Packing TypeBag
BrandBalaji

Minimum order quantity: 10 Bag

One Coat Directive applied on Brick, Block & RCC Ceillips
  • Imported Gypsum Plaster
  • I High Purity 
  • Full Value of Money
  • Saves Time
  • Smooth Finishing
  • No Shrinkage Cracks
  • No Wastage
  • No Maintenance
  • NO Water Curing
  • Do Not Use Hooks
  • 200 mesh super white
X

Contact Us

Kiran Prajapati (CEO)
Balaji Gypsum Private Limited
Shop No 14, Sr No 90, Gate No 3, Veer bhadranagar, Baner
Pune - 411045, Maharashtra, India

Get Directions
Send Email
Share: